Posts tagged ‘JOYO Mjolnir High Gain Tube Amplifier’


This is a metal head. JOYO Mjolnir High Gain Tube Amplifier

JMA-15 1(1)MJOLNIR HEAD Despues de vender millones de pedales en los últimos años. Nos han presentado este fenomenal cabezal JOYO Mjolnir High Gain Tube Amplifier –

  • Cabezal de doble canal conmutable Clean / Distortion
  • Tecnología 100% valvular tube: ECC83 *3,ECC82 *1, EL84 *2
  • Ecualización independiente en cada canal 3 band EQ
  • Control Volume control independiente en cada canal
  • Función Boost para llevarlo al límite
  • Conmuta dos modos diferentes : Vintage/MOD distortion
  • Lazo de efectos: send / return effect loop – loop bypass funtion
  • Salida de altavoces – speaker output: 4/8/16Ω switchable
  • Potencia: 15Watios (RMS)
  • Incluye el pedal de cambio de canal footswitch pedal
  • Dimensiones:334.2*160*160mm   Peso :8.9KG


La linea de nuevos amplis Joyo y Docotor J  promete mucho


JOYO Mjolnir High Gain Tube Amplifier 
Dual Channel(Clean/Distortion) switchable – tube: ECC83*3,ECC82*1,EL84*2  – independent 3 band EQ for each channel  – independent Volume control for each channel  – Boost funtion  – Vintage/MOD distortion mode switchable -send and return effect loop with loop bypass funtion  – speaker output: 4/8/16Ω switchable  – rated power: 15W(RMS)  – accessory: footswitch pedal  – Dimensions:334.2*160*160mm  – Weight:8.9KG




Ampli Mjolnir de JOYO – High Gain Tube Amplifier

Presentamos el nuevo cabezal de Joyo. JOYO Mjolnir High Gain Tube Amplifier – Imposible mejor relación calidad-precio

Designed especially for metal sounds. It features a straightforward approach with deep low end and searing distortion. This amplifier will give twin coil pickups a thunderous roar and make single coils cut straight through the mix! The JMA-15 is designed with a classical high gain circuit and two channels: Channel 1 is CLEAN, PUSH is used for boosting middle frequency and gain. Channel 2 is distortion and includes NORMAL and MID CUT controls. When in NORMAL mode you can obtain fierce modern distortion. Engaging the MID CUT will give you a solid and heavy low frequency. BOOST can be used on both channels. The JMA-15 has 4-8-and16Ω impedance speaker outputs, which can power any mainstream cabinet. An effects LOOP is included, but can be BYPASSED when a pure tube tone is desired. Channel switching is easily accessed during performance via the included FOOT SWITCH.The JMA-15 is housed in an all-metal case, and is powered by three ECC83, one ECC82, two EL84. 15W output, can be used for practicing, rehearsal and performance.este